Honda Service Brakes, Hydraulic

Home   →   Honda   →   Service Brakes, Hydraulic

View 1646 Service Brakes, Hydraulic Safety Reports

Honda Civic 1996
Honda (american Honda Motor Co.)
Safety incident date:
July 27, 1996
Location:
Fremont, CA

drove vehicle, hit another vehicle, brakes failed. *ak

Vehicle was involved in a crash. Original Owner. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control.

Honda Accord 1991
Honda (american Honda Motor Co.)
Safety incident date:
Dec 19, 1996
Location:
Madison, WI

while driving vehicle lost braking power while braking, had slid into a parked vehicle, the engine would shut down at the same time. vehicle taken to repair, could not find problem or duplicate problem. *ak

0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1HGCB7543MA. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control. Vehicle Speed: 20 mph.

Honda Cbr1000f 1995
Honda (american Honda Motor Co.)
Safety incident date:
Nov 03, 1996
Location:
Pisgh Forest, NC

consumer was driving in dry weather conditions and the front brakes locked up, causing the motorcycle to skid to a stop. the motorcycle turned over on the left side, resulting in injuries to the occupant. *ak

Vehicle was involved in a crash. 1 person(s) were injured. Vehicle Identification Number (VIN):JH2C242075M. Accident was reported to Police. Original Owner. Vehicle was purchased on Mar 01, 1995. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control. Honda CBR1000F 1995 Drive type:RWD. Fuel System:N/A. Fuel type: gas. Honda CBR1000F 1995 Service Brakes, Hydraulic Transmission Type: MAN . Vehicle Speed: 25 mph.

Honda Goldwing 1997
Honda (american Honda Motor Co.)
Safety incident date:
May 23, 1997
Location:
Downingtown, PA

right foot brake is some what ackward position. you must rotate your for your ankle to its fullest downward position in order to get proper braking. please describe details.

Vehicle Identification Number (VIN):1HFSC2238VA. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control.

Honda Civic 1992
Honda (american Honda Motor Co.)
Location:
Duluth, MN

each time he vehicle came to a stop the brakes would grind, shutter and squeal.

Vehicle Identification Number (VIN):THMEH9691SN. Original Owner. Vehicle was purchased on July 13, 1998. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Honda CIVIC 1992 Drive type:FWD. Fuel type: gas.

Honda Cbr600f 1989
Honda (american Honda Motor Co.)
Safety incident date:
Aug 08, 1998
Location:
East Lauri, NC

rear brake line failure.

Vehicle Identification Number (VIN):JK2PC2502VM. Vehicle was purchased on July 09, 1998. Vehicle was not using Cruise Control. Honda CBR600F 1989 Drive type:RWD. Fuel System:N/A. Fuel type: gas. Vehicle Speed: 35 mph.

Honda Civic 1996
Honda (american Honda Motor Co.)
Location:
Tempe, AZ

this vehicle has had numerous problems including: brake failure, transmission failure - causing it to stall and start on occasions, tire blowouts, the electronic doors, windows and locks malfunction, and an air conditioner that does not drain properly causing excessive mold growth.

Original Owner. Vehicle was purchased on Jan 09, 1996. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Honda CIVIC 1996 Drive type:FWD. Fuel System:N/A. Fuel type: gas.

Honda Vt700 9999
Honda (american Honda Motor Co.)
Safety incident date:
May 27, 2000
Location:
Cannon Beach, OR

all brake pipe parts # 45128-341-670, currently being supplied by honda as replacement parts are very similar to original parts, but threading of male fitting at either end is of slightly finer pitch than that of the original parts. all current honda motorcycles have fine threaded fittings as found on subject replacement part but earlier models have fittings of the same diameter with slightly coarser threads,perhaps only one thread per cm maybe two . this makes it very easy to start threading it into the memale fitting straightly turnig two cranks before feelig any tightness at all and it becomes only ever so essy to strip the soft aluminum threads of the brake calipher .many people woud tighten it completely thinkig they have a secure leak free fit. somewhere along the way honda changed the design specifications on all brake fittings for their motorcycles.it is therefore conceivable that all replacement parts intended for motorcycles with brake line fittings with the coarser threads may have the same problem i have thus far described. i know for a fact all 1969-1975 cb 750k models are affected (appx 300,000 units) and most likely all subsequent years of the cb 750 k models. also, all honda's with the brake calipher located to the front of the fork casing have similar parts as the subject part if not exactly the same part. i contacted you once before ,in thr spring of 1990 ,and you found my information credible enough to take immediate action with chevrolet.it is my sincere hope that you perform as expeditiously this time. my sincere thanks.

0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):HONDA CB750. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control. Honda VT700 9999 Drive type:FWD. Fuel type: gas. Vehicle Speed: 0 mph.

Honda Accord 2000
Honda (american Honda Motor Co.)
Location:
Arlington, TX

when on the road vehicle wanders. it has no neutral point. when trying to correct it, vehicle wanders to the other side. dealer has been contacted. also, when brakes are applied, brake pedal continues down its full travel to a mechanical "clunk". master cylinder has been replaced, but still occurs. *ak *ml

Vehicle Identification Number (VIN):1HGCG5644YA. Original Owner. Vehicle was purchased on Mar 08, 2000. Vehicle was not using anit-lock brakes. Vehicle was using Cruise Control.Honda ACCORD 2000 Drive type:FWD. Fuel System:N/A. Fuel type: gas. Honda ACCORD 2000 Service Brakes, Hydraulic Transmission Type: AUTO.

Honda Goldwing 2001
Honda (american Honda Motor Co.)
Safety incident date:
Jan 01, 2001
Location:
Santa Paula, CA

motorcycle's brakes are defective. *ak

0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1HFSC18132A. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control. Vehicle Speed: 0 mph.

Honda Gl1800 9999
Honda (american Honda Motor Co.)
Location:
Cape Coral, FL

the brakes constantly squeal and the front calipers hang up and drag on the rotors. *yh

Vehicle Identification Number (VIN):1HFGC2233VA. Original Owner. Vehicle was purchased on Mar 03, 2001. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control. Vehicle Speed: 50 mph.

Honda Gl1800 9999
Honda (american Honda Motor Co.)
Location:
Cape Coral, FL

the brakes constantly squeal and the front calipers hang up and drag on the rotors. *yh

Vehicle Identification Number (VIN):1HFGC2233VA. Original Owner. Vehicle was purchased on Mar 03, 2001. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control. Vehicle Speed: 50 mph.

Honda Gl1800 2001
Honda (american Honda Motor Co.)
Location:
Cape Coral, FL

consumer states the brakes constantly squeal and the front calipers hang up and drag on the rotors. *tt

Vehicle Identification Number (VIN):1HFGC2233VA. Original Owner. Vehicle was purchased on Mar 03, 2001. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control.

Honda Vt600 2001
Honda (american Honda Motor Co.)
Safety incident date:
Sept 03, 2002
Location:
Los Angles, CA

while applying the brakes and with no warning brakes went out, causing extended stopping distance. dealer notified. *ak

Vehicle Identification Number (VIN):RFWMC15X1P0. Original Owner. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control.

Honda Civic 2002
Honda (american Honda Motor Co.)
Safety incident date:
Sept 11, 2002
Location:
Austin, TX

consumer states that when applying the brakes the vehicle brakes will skid when wet causing the vehicle accident. dealer notified. mr

Vehicle was involved in a crash. Vehicle Identification Number (VIN):1HGEM21982L. Original Owner. Vehicle was using anit-lock brakes.Vehicle was not using Cruise Control.

Honda Odyssey 2001
Honda (american Honda Motor Co.)
Safety incident date:
Oct 01, 2002
Location:
Oakridge, TN

the consumer is concerned because of the premature wearing of the brakes. the consumer stated that the brakes are warped. the dealership is aware of the problem. mr

Vehicle Identification Number (VIN):2HKRL18651H. Vehicle was not using Cruise Control.

Honda Passport 1998
Honda (american Honda Motor Co.)
Safety incident date:
Sept 01, 1998
Location:
Burbank, CA

the braking system is not working according to the consumer the stoping distance hesitate. please provide additional information. dealer is aware of the problem. ts

Vehicle Identification Number (VIN):4S6PN58W7W4. Vehicle was not using Cruise Control.

Honda Civic 2001
Honda (american Honda Motor Co.)
Safety incident date:
Nov 30, 2002
Location:
Arnold, MD

when consumer shifted the gears, the engine surged and vehicle suddenly accelerated, resulting in a collision, consumer applied brakes hard, but car would not stop. related recall 01v329000, consumer's v.i.n. not included. ts upon impact the air bags did not deploy. it is also noted that the technican experienced the same condition when entering the vehicle to be serviced. it was determined that the transmission was faulty. consumer sustained minor injuries and there was front end damage. *tt...*ak

Vehicle was involved in a crash. 1 person(s) were injured. Mileage was 24000 miles. Vehicle Identification Number (VIN):1HGEM22921L. Accident was reported to Police. Original Owner. Vehicle was purchased on June 22, 2001. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Vehicle had 4 cylinders. Honda CIVIC 2001 Drive type:FWD. Fuel type: gas. Honda CIVIC 2001 Service Brakes, Hydraulic Transmission Type: AUTO. Dealer's name: Tischer Honda .

Honda Accord 1998
Honda (american Honda Motor Co.)
Safety incident date:
Nov 25, 2002
Location:
W. Windsor, NJ

the transmission failed at a low mileage, also the front brake pads was replaced and the rotors were resurfaced.*jb

Mileage was 52500 miles. Vehicle Identification Number (VIN):1HGCG5648WA. Original Owner. Vehicle was purchased on Jan 26, 1998. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Vehicle had 6 cylinders. Honda ACCORD 1998 Drive type:FWD. Fuel type: gas. Honda ACCORD 1998 Service Brakes, Hydraulic Transmission Type: AUTO. Dealer's name: Auto Sport Honda . Dealer's city: Bridgewater . Dealer's state code: NJ. Dealer's zipcode: 08807 .

Honda Cr-v 2002
Honda (american Honda Motor Co.)
Safety incident date:
Sept 24, 2002
Location:
Tallahassee, FL

consumer experiencing popping noises coming from brake system, the vehicle was taken to the dealer who stated that this noise was normal because of the new digital braking system. mr *nlm

Mileage was 3000 miles. Vehicle Identification Number (VIN):SHSRD68432U. Original Owner. Vehicle was purchased on June 30, 2002. Vehicle was using anit-lock brakes.Vehicle was not using Cruise Control.


Common Honda Problems

View Service Brakes, Hydraulic Safety Reports

Power Train:automatic Transmission (4455 Reviews)

Air Bags (3602 Reviews)

Electrical System (2969 Reviews)

Power Train (2816 Reviews)

Vehicle Speed Control (1748 Reviews)

Service Brakes, Hydraulic (1646 Reviews)

Air Bags:frontal (1529 Reviews)

Steering (1515 Reviews)

Engine (1490 Reviews)

Engine And Engine Cooling (1269 Reviews)

Unknown Or Other (1168 Reviews)

Service Brakes (992 Reviews)

Suspension (988 Reviews)

Tires (972 Reviews)

Structure:body (934 Reviews)

Engine And Engine Cooling:engine (867 Reviews)

Exterior Lighting (853 Reviews)

Seats (806 Reviews)

Electrical System:ignition:switch (755 Reviews)

Visibility (755 Reviews)


footer