Acura Service Brakes, Hydraulic Foundation Components Disc Pads


View 13 Service Brakes, Hydraulic Foundation Components Disc Pads Safety Reports

Acura Legend 1988
Honda (american Honda Motor Co.)
Safety incident date:
Jan 01, 1995
Location:
Centrevill, VA

abnormal wear of right front brake pad.

0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JH4KA3251JC. Vehicle was not using Cruise Control.

Acura Tl 1996
Honda (american Honda Motor Co.)
Safety incident date:
Apr 01, 1996
Location:
La Canada, CA

rear brake pads worn.

0 person(s) died.Vehicle Identification Number (VIN):JH4UA2652TC. Original Owner. Vehicle was purchased on Oct 01, 1995. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Acura TL 1996 Drive type:FWD. Fuel System:N/A. Fuel type: gas. Acura TL 1996 Service Brakes, Hydraulic Foundation Components Disc Pads Transmission Type: AUTO.

Acura Integra 1996
Honda (american Honda Motor Co.)
Safety incident date:
Dec 01, 1996
Location:
Redlands, CA

brake pads failed.

Vehicle Identification Number (VIN):JH4UA2653TC. Original Owner. Vehicle was purchased on Jan 01, 1996. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Acura INTEGRA 1996 Drive type:FWD. Fuel type: gas. Acura INTEGRA 1996 Service Brakes, Hydraulic Foundation Components Disc Pads Transmission Type: AUTO.

Acura Integra 1995
Honda (american Honda Motor Co.)
Location:
Williamsvi, NY

left rear brake pads worn out causing the rear brakes to lock up resulting in loss of control.

Original Owner. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Acura INTEGRA 1995 Drive type:FWD. Fuel System:N/A. Fuel type: gas. Vehicle Speed: 35 mph.

Acura Rl 1998
Honda (american Honda Motor Co.)
Safety incident date:
July 03, 2000
Location:
Chalfont, PA

rear brake pads were required to be replaced at 16552 miles due to wear. front brake pads required to be replaced at 26,219 miles due to wear. dealer claims that these are just "softer pads" and it is normal for the brakes to wear out this quickly. i don't buy it. no one has been hurt-yet. *ak

0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JH4KA9642WC. Original Owner. Vehicle was purchased on Dec 01, 1998. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Acura RL 1998 Drive type:FWD. Fuel System:N/A. Fuel type: gas. Vehicle Speed: 1 mph.

Acura Legend 1992
Honda (american Honda Motor Co.)
Safety incident date:
Oct 03, 2000
Location:
Key Biscay, FL

the front and rear brake pads were low and the master cylinder was leaking causing the brake light to illuminate. nlm

Vehicle Identification Number (VIN):JH4KA7670NC. Vehicle was not using Cruise Control.

Acura Integra 2000
Honda (american Honda Motor Co.)
Safety incident date:
Aug 13, 2002
Location:
Des Plaines, IL

premataure failure of one rear brake pad. *ak

0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JH4DC2398YS. Original Owner. Vehicle was purchased on Dec 01, 2099. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Acura INTEGRA 2000 Drive type:FWD. Fuel System:N/A. Fuel type: gas. Vehicle Speed: 0 mph.

Acura Rsx 2003
Honda (american Honda Motor Co.)
Safety incident date:
July 09, 2004
Location:
Riverside, CA

brakes make grinding noise and power steering fluid goes down, i have had the brakes replaced about 4 times in the front, the rear brakes have been replaced one, within a month after purchasing my acura rsx i began to hear the brake noises, had them fixed with acura, but the noised came back so i had them done with sears twice and once again at acura and as of today they are making grinding noise, i think the rotors need changing. also i have about 31,000 miles and my power steering keeps going way below the lower level and the power steering beings to make a loud screeching noise as well, i have taken it to get the power steering checked, and they say its fine. *ak

0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JH4DC54843C. Original Owner. Vehicle was purchased on Mar 24, 2003. Vehicle was not using anit-lock brakes. Vehicle was using Cruise Control.Vehicle had 4 cylinders. Acura RSX 2003 Drive type:FWD. Fuel System:Fuel injection. Fuel type: gas. Acura RSX 2003 Service Brakes, Hydraulic Foundation Components Disc Pads Transmission Type: AUTO. Dealer's name: Acura Of Riverside . Dealer's city: Riverside . Dealer's state code: CA.

Acura Legend 1991
Honda (american Honda Motor Co.)
Safety incident date:
Sept 01, 2005
Location:
Corvallis, OR

dt: the contact stated the replacement brake pads wore out prematurely. the wheels on the vehicle were covered with brake dust within three days of the replacement. he replaced the brake pads with an after market brand and this corrected the problem. the acura replacement brake pad part number was 45022-sm5-506.*ak updated 11/29/2005 - *nm

Vehicle Identification Number (VIN):JH4KA7657MC. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Vehicle had 6 cylinders. Fuel type: gas. Dealer's name: University Honda . Dealer's telephone number: 541-752-2150 . Dealer's city: Corvallis . Dealer's state code: OR. Dealer's zipcode: 97330 .

Acura Rl 2006
Honda (american Honda Motor Co.)
Safety incident date:
Dec 01, 2005
Location:
Brookfield, WI

2006 acura rl makes a metal to metal noise when braking at low speeds. *ts **no answer required*** the vehicle was taken tot he dealer who determined that the noise was a normal characteristic of the brake pads in the 2006 rl because the brake pad composition had been redesigned. the dealer told the consumer that the manufacturer is aware of the problem. *nm

Vehicle Identification Number (VIN):JH4KB16566C. Original Owner. Vehicle was purchased on Nov 29, 2005. Vehicle was not using anit-lock brakes. Vehicle was not using Cruise Control. Acura RL 2006 Drive type:AWD. Dealer's name: Acura Of Brookfield . Dealer's city: Brookfield . Dealer's state code: WI.

Acura Tl 2004
Honda (american Honda Motor Co.)
Safety incident date:
May 31, 2006
Location:
Broomfield, CO

i had to break for a cat running in the road to a heavy and complete stop. it caused the one of the front brake pads to melt and now are harden and don't stop as well and makes a heavy grinding noise. took to dealer and they said its ok just to brake hard a few times and will clear the pad. i have tried this and the nose is getting worst. i feel that the car in emergency stop will cause the brake to fail or melt do to the higher friction. pad dose not seem to be soft but hard now. the car may not be able to stop in emergency stop once pads heat up. the acura will not fix the issue because they don't see it as an issue. *nm

0 person(s) were injured. 0 person(s) died.Mileage was 29000 miles. Vehicle Identification Number (VIN):19UUA65584A. Original Owner. Vehicle was purchased on May 01, 2004. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Vehicle had 6 cylinders. Acura TL 2004 Drive type:FWD. Fuel System:Fuel injection. Acura TL 2004 Service Brakes, Hydraulic Foundation Components Disc Pads Transmission Type: MAN . Vehicle Speed: 45 mph. Dealer's name: Flaitirons Acura . Dealer's telephone number: 303-442-2544 . Dealer's city: Boulder . Dealer's state code: CO. Dealer's zipcode: 80303-1366.

Acura Mdx 2002
Honda (american Honda Motor Co.)
Safety incident date:
Dec 22, 2002
Location:
Katy, TX

clip on the front brake pad keep loosening even after new pads where replaced. *tr

Vehicle Identification Number (VIN):2HNYD18862H. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Vehicle had 6 cylinders. Acura MDX 2002 Drive type:4WD. Fuel System:Fuel injection. Fuel type: gas. Acura MDX 2002 Service Brakes, Hydraulic Foundation Components Disc Pads Transmission Type: AUTO. Dealer's name: Sterling Mccall Acura . Dealer's telephone number: 713-596-2365 . Dealer's city: Houston . Dealer's state code: TX. Dealer's zipcode: 77074 .

Acura Tsx 2009
Honda (american Honda Motor Co.)
Safety incident date:
Jan 20, 2010
Location:
Flushing, NY

tl* the contact owns a 2009 acura tsx. he states that while braking he heard screeching and grinding noises.this has been occurring for 2 weeks now. the dealer was contacted and they stated that it was a premature wear. the contact is concerned about the safety risk. the brake pads were replaced at the owners expense at $232.94 dollars.the contact states that this is a premature brake issue.the failure mileage was 13535 and current mileage was 13600. updated 2/22/10 *cn updated 06/01/10.*jb

Mileage was 13353 miles. Vehicle Identification Number (VIN):JH4CU26629C. Original Owner. Vehicle was purchased on Jan 02, 2009. Vehicle was using anit-lock brakes.Vehicle was using Cruise Control.Vehicle had 4 cylinders. Acura TSX 2009 Drive type:FWD. Fuel System:Fuel injection. Fuel type: gas. Acura TSX 2009 Service Brakes, Hydraulic Foundation Components Disc Pads Transmission Type: AUTO. Dealer's name: Rallye Acura . Dealer's telephone number: 516-625-7777 . Dealer's city: Roslyn . Dealer's state code: NY. Dealer's zipcode: 11576 .


Common Acura Problems

View Service Brakes, Hydraulic Foundation Components Disc Pads Safety Reports

Power Train:automatic Transmission (1229 Reviews)

Air Bags (462 Reviews)

Power Train (449 Reviews)

Structure (351 Reviews)

Electrical System (340 Reviews)

Vehicle Speed Control (242 Reviews)

Air Bags:frontal (208 Reviews)

Steering (181 Reviews)

Unknown Or Other (166 Reviews)

Tires (138 Reviews)

Structure:body (127 Reviews)

Engine And Engine Cooling (123 Reviews)

Engine (121 Reviews)

Equipment:electrical:radio/tape Deck/cd Etc. (114 Reviews)

Service Brakes, Hydraulic:antilock (106 Reviews)

Exterior Lighting (103 Reviews)

Suspension (98 Reviews)

Service Brakes (93 Reviews)

Service Brakes, Hydraulic (91 Reviews)

Power Train:manual Transmission (90 Reviews)


footer